| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
Constructing a high-performing commercial poultry house requires balancing structural durability, thermal efficiency, and speed of deployment. Traditional brick-and-concrete barns involve lengthy construction timelines, high labor costs, and rigid layouts that are difficult to modify. Our Prefabricated Light-Steel Structure Poultry House offers a modern, modular engineering solution designed specifically for large-scale broiler, layer, and breeder operations.
Manufactured in controlled factory conditions using high-strength hot-dip galvanized steel, every column, roof truss, and purlin arrives at your farm site pre-cut, pre-drilled, and ready for bolted assembly. This precision-engineered poultry house system resists harsh ammonia environments, withstands high wind and snow loads, and provides a clear-span interior free of obstructing support pillars.
The primary load-bearing skeleton utilizes Q355B or Q235B structural steel treated with a minimum 275 g/m² hot-dip galvanized zinc coating. Unlike painted steel frames that peel and rust under high humidity and ammonia exposure, hot-dip galvanization provides decades of corrosion protection without recurring structural maintenance.
Our truss engineering eliminates interior columns across spans up to 18 meters (60 feet). A completely open floor plan allows unobstructed placement of feeding lines, drinking lines, or multi-tier battery cages, while simplifying tractor clean-out and high-pressure sanitation between flocks.
Depending on local climate conditions, buyers can configure the building envelope with single-layer corrugated color-coated steel sheets paired with fiberglass wool insulation, or factory-bonded EPS, Polyurethane (PU), and Rockwool sandwich panels. All panel joints feature weather-tight overlapping seams to prevent air leaks and thermal bridging.
All structural connections use high-strength 8.8-grade galvanized bolts rather than on-site welding. This reduces construction time by up to 40% compared to conventional masonry buildings and preserves the integrity of the protective zinc coating at every joint.
| Structural Parameter | Standard Span Model (PH-12) | Wide Span Commercial Model (PH-15) |
|---|---|---|
| Standard Width × Length | 12 m × 80 m – 120 m | 15 m × 100 m – 150 m |
| Eave Height | 2.8 m – 3.5 m (Floor-raised) | 3.5 m – 5.5 m (Multi-tier cage ready) |
| Primary Frame Steel | Q355B H-Section / Portal Truss | Q355B Heavy Portal Frame |
| Surface Protection | 275 g/m² Hot-Dip Galvanized | 275–350 g/m² Hot-Dip Galvanized |
| Roof & Wall Cladding | 0.5 mm Steel + 50–75 mm Insulation | 50–100 mm PU / Rockwool Sandwich Panel |
| Wind Load Resistance | Up to 160 km/h (Grade 12) | Up to 180 km/h (Custom reinforced) |
| Snow Load Capacity | 0.5 – 1.0 kN/m² | 1.0 – 2.0 kN/m² |
| Design Service Life | 30+ Years (Primary Structure) | 35+ Years (Primary Structure) |
A: A light-steel poultry house requires significantly lighter foundations than brick buildings. Typically, isolated concrete pad footings under each steel column connected by a 300 mm to 500 mm concrete dwarf wall (curb wall) and a 100 mm reinforced concrete floor slab are sufficient. We provide complete foundation anchor-bolt layout drawings upon order confirmation.
A: Once the concrete foundation has cured, a team of 8 to 10 workers with a light crane or telehandler can erect the primary steel frame, roof cladding, and wall panels in approximately 15 to 20 working days.
A: Yes. Every poultry house is custom-engineered to your exact site dimensions, local wind and seismic codes, and target flock capacity. Widths from 10 m to 20 m and lengths from 50 m to 160 m are routinely manufactured.
A: Yes. We provide detailed 3D assembly manuals, numbered component diagrams, and optional on-site technical supervision by experienced structural engineers to ensure smooth erection and commissioning.
| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
Constructing a high-performing commercial poultry house requires balancing structural durability, thermal efficiency, and speed of deployment. Traditional brick-and-concrete barns involve lengthy construction timelines, high labor costs, and rigid layouts that are difficult to modify. Our Prefabricated Light-Steel Structure Poultry House offers a modern, modular engineering solution designed specifically for large-scale broiler, layer, and breeder operations.
Manufactured in controlled factory conditions using high-strength hot-dip galvanized steel, every column, roof truss, and purlin arrives at your farm site pre-cut, pre-drilled, and ready for bolted assembly. This precision-engineered poultry house system resists harsh ammonia environments, withstands high wind and snow loads, and provides a clear-span interior free of obstructing support pillars.
The primary load-bearing skeleton utilizes Q355B or Q235B structural steel treated with a minimum 275 g/m² hot-dip galvanized zinc coating. Unlike painted steel frames that peel and rust under high humidity and ammonia exposure, hot-dip galvanization provides decades of corrosion protection without recurring structural maintenance.
Our truss engineering eliminates interior columns across spans up to 18 meters (60 feet). A completely open floor plan allows unobstructed placement of feeding lines, drinking lines, or multi-tier battery cages, while simplifying tractor clean-out and high-pressure sanitation between flocks.
Depending on local climate conditions, buyers can configure the building envelope with single-layer corrugated color-coated steel sheets paired with fiberglass wool insulation, or factory-bonded EPS, Polyurethane (PU), and Rockwool sandwich panels. All panel joints feature weather-tight overlapping seams to prevent air leaks and thermal bridging.
All structural connections use high-strength 8.8-grade galvanized bolts rather than on-site welding. This reduces construction time by up to 40% compared to conventional masonry buildings and preserves the integrity of the protective zinc coating at every joint.
| Structural Parameter | Standard Span Model (PH-12) | Wide Span Commercial Model (PH-15) |
|---|---|---|
| Standard Width × Length | 12 m × 80 m – 120 m | 15 m × 100 m – 150 m |
| Eave Height | 2.8 m – 3.5 m (Floor-raised) | 3.5 m – 5.5 m (Multi-tier cage ready) |
| Primary Frame Steel | Q355B H-Section / Portal Truss | Q355B Heavy Portal Frame |
| Surface Protection | 275 g/m² Hot-Dip Galvanized | 275–350 g/m² Hot-Dip Galvanized |
| Roof & Wall Cladding | 0.5 mm Steel + 50–75 mm Insulation | 50–100 mm PU / Rockwool Sandwich Panel |
| Wind Load Resistance | Up to 160 km/h (Grade 12) | Up to 180 km/h (Custom reinforced) |
| Snow Load Capacity | 0.5 – 1.0 kN/m² | 1.0 – 2.0 kN/m² |
| Design Service Life | 30+ Years (Primary Structure) | 35+ Years (Primary Structure) |
A: A light-steel poultry house requires significantly lighter foundations than brick buildings. Typically, isolated concrete pad footings under each steel column connected by a 300 mm to 500 mm concrete dwarf wall (curb wall) and a 100 mm reinforced concrete floor slab are sufficient. We provide complete foundation anchor-bolt layout drawings upon order confirmation.
A: Once the concrete foundation has cured, a team of 8 to 10 workers with a light crane or telehandler can erect the primary steel frame, roof cladding, and wall panels in approximately 15 to 20 working days.
A: Yes. Every poultry house is custom-engineered to your exact site dimensions, local wind and seismic codes, and target flock capacity. Widths from 10 m to 20 m and lengths from 50 m to 160 m are routinely manufactured.
A: Yes. We provide detailed 3D assembly manuals, numbered component diagrams, and optional on-site technical supervision by experienced structural engineers to ensure smooth erection and commissioning.