| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
Day-old broiler chicks require a precise brooding temperature of 32°C to 34°C, whereas market-weight broilers at 35 to 42 days perform best around 18°C to 21°C. Maintaining this controlled thermal curve when outdoor temperatures plunge to -25°C in winter or soar above 45°C in summer requires superior building insulation. Our Insulated Sandwich-Panel Broiler Poultry House is engineered with a continuous, factory-bonded thermal barrier that eliminates cold bridges, slashes heating fuel consumption, and stabilizes indoor microclimates year-round.
Unlike conventional barns insulated on-site with loose fiberglass rolls that sag, absorb moisture, or attract rodents, this modern poultry house uses rigid, high-density insulated sandwich panels locked onto a hot-dip galvanized steel frame.
Each wall and roof panel consists of two corrosion-resistant color-coated steel facings bonded under high pressure to an insulating core:
Heat loss and unwanted drafts typically occur where wall or roof panels meet. Our poultry house panels utilize precision-milled tongue-and-groove edge profiles embedded with EPDM rubber sealing gaskets and concealed fasteners. This creates an airtight, vapor-sealed interior shell that prevents warm, humid indoor air from condensing inside wall cavities.
High ammonia concentrations and frequent high-pressure chemical washdowns can quickly degrade standard painted sheet metal. We manufacture the interior panel skins using 150 g/m² Aluzinc (aluminum-zinc alloy) steel coated with high-durability polyester or PVDF finishes, protecting against chemical pitting and rust throughout decades of broiler cycles.
Every roof ridge cap, gable trim, and foundation curb junction is fitted with extruded closed-cell foam closures and continuous flashing. Eliminating exposed metal-to-metal contact between exterior and interior cladding stops conductive heat transfer and prevents winter ceiling condensation drips onto broiler litter.
| Building Parameter | Temperate & Hot Climate Spec (PU-50/75) | Sub-Zero & Extreme Cold Spec (PU-100/120) |
|---|---|---|
| Wall Panel Core & Thickness | 50 mm – 75 mm Polyurethane (PU) | 100 mm – 120 mm PU / PIR Panel |
| Roof Panel Core & Thickness | 75 mm Ribbed PU Sandwich Panel | 100 mm – 120 mm Ribbed PU / PIR Panel |
| Core Foam Density | 40 – 42 kg/m³ (High-rigidity closed cell) | 40 – 42 kg/m³ (High-rigidity closed cell) |
| Thermal Transmittance (U-Value) | 0.28 – 0.42 W/m²·K | 0.18 – 0.22 W/m²·K |
| Exterior / Interior Steel Skin | 0.5 mm / 0.45 mm Aluzinc Coated Steel | 0.5 mm / 0.5 mm Aluzinc + PVDF Option |
| Fire Retardancy Rating | B1 Flame Retardant (PU) / A1 (Rockwool) | B1 / B2 (PIR) or A1 Non-Combustible |
| Snow & Wind Load Rating | 1.0 kN/m² Snow / 160 km/h Wind | 2.0+ kN/m² Snow / 180 km/h Wind |
| Primary Frame Protection | 275 g/m² Hot-Dip Galvanized Q355B | 275–350 g/m² Hot-Dip Galvanized Q355B |
A: Polyurethane (PU) is the most popular choice for broiler houses because it delivers roughly 40% better thermal insulation per millimeter than mineral wool, is completely waterproof during high-pressure washdowns, and is lightweight for shipping. Rockwool is recommended when local agricultural building codes or insurance underwriters strictly mandate A1 non-combustible fire-rated walls.
A: All interior vertical wall panel joints and base-curb junctions are sealed with neutral-cure, mold-resistant agricultural silicone sealant during installation. Combined with factory tongue-and-groove gaskets, the interior walls form a seamless, waterproof washdown surface.
A: Yes. Our trapezoidal ribbed roof sandwich panels are engineered with high-load standing seams and reinforced steel purlins capable of supporting rooftop photovoltaic (PV) solar racking systems without puncturing the waterproof thermal barrier.
A: Every panel is covered with a peel-off protective PE film, stacked in precision-blocked bundles with corner edge protectors, and loaded carefully into 40-foot High Cube (40'HQ) containers to arrive at your site dent-free.
| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
Day-old broiler chicks require a precise brooding temperature of 32°C to 34°C, whereas market-weight broilers at 35 to 42 days perform best around 18°C to 21°C. Maintaining this controlled thermal curve when outdoor temperatures plunge to -25°C in winter or soar above 45°C in summer requires superior building insulation. Our Insulated Sandwich-Panel Broiler Poultry House is engineered with a continuous, factory-bonded thermal barrier that eliminates cold bridges, slashes heating fuel consumption, and stabilizes indoor microclimates year-round.
Unlike conventional barns insulated on-site with loose fiberglass rolls that sag, absorb moisture, or attract rodents, this modern poultry house uses rigid, high-density insulated sandwich panels locked onto a hot-dip galvanized steel frame.
Each wall and roof panel consists of two corrosion-resistant color-coated steel facings bonded under high pressure to an insulating core:
Heat loss and unwanted drafts typically occur where wall or roof panels meet. Our poultry house panels utilize precision-milled tongue-and-groove edge profiles embedded with EPDM rubber sealing gaskets and concealed fasteners. This creates an airtight, vapor-sealed interior shell that prevents warm, humid indoor air from condensing inside wall cavities.
High ammonia concentrations and frequent high-pressure chemical washdowns can quickly degrade standard painted sheet metal. We manufacture the interior panel skins using 150 g/m² Aluzinc (aluminum-zinc alloy) steel coated with high-durability polyester or PVDF finishes, protecting against chemical pitting and rust throughout decades of broiler cycles.
Every roof ridge cap, gable trim, and foundation curb junction is fitted with extruded closed-cell foam closures and continuous flashing. Eliminating exposed metal-to-metal contact between exterior and interior cladding stops conductive heat transfer and prevents winter ceiling condensation drips onto broiler litter.
| Building Parameter | Temperate & Hot Climate Spec (PU-50/75) | Sub-Zero & Extreme Cold Spec (PU-100/120) |
|---|---|---|
| Wall Panel Core & Thickness | 50 mm – 75 mm Polyurethane (PU) | 100 mm – 120 mm PU / PIR Panel |
| Roof Panel Core & Thickness | 75 mm Ribbed PU Sandwich Panel | 100 mm – 120 mm Ribbed PU / PIR Panel |
| Core Foam Density | 40 – 42 kg/m³ (High-rigidity closed cell) | 40 – 42 kg/m³ (High-rigidity closed cell) |
| Thermal Transmittance (U-Value) | 0.28 – 0.42 W/m²·K | 0.18 – 0.22 W/m²·K |
| Exterior / Interior Steel Skin | 0.5 mm / 0.45 mm Aluzinc Coated Steel | 0.5 mm / 0.5 mm Aluzinc + PVDF Option |
| Fire Retardancy Rating | B1 Flame Retardant (PU) / A1 (Rockwool) | B1 / B2 (PIR) or A1 Non-Combustible |
| Snow & Wind Load Rating | 1.0 kN/m² Snow / 160 km/h Wind | 2.0+ kN/m² Snow / 180 km/h Wind |
| Primary Frame Protection | 275 g/m² Hot-Dip Galvanized Q355B | 275–350 g/m² Hot-Dip Galvanized Q355B |
A: Polyurethane (PU) is the most popular choice for broiler houses because it delivers roughly 40% better thermal insulation per millimeter than mineral wool, is completely waterproof during high-pressure washdowns, and is lightweight for shipping. Rockwool is recommended when local agricultural building codes or insurance underwriters strictly mandate A1 non-combustible fire-rated walls.
A: All interior vertical wall panel joints and base-curb junctions are sealed with neutral-cure, mold-resistant agricultural silicone sealant during installation. Combined with factory tongue-and-groove gaskets, the interior walls form a seamless, waterproof washdown surface.
A: Yes. Our trapezoidal ribbed roof sandwich panels are engineered with high-load standing seams and reinforced steel purlins capable of supporting rooftop photovoltaic (PV) solar racking systems without puncturing the waterproof thermal barrier.
A: Every panel is covered with a peel-off protective PE film, stacked in precision-blocked bundles with corner edge protectors, and loaded carefully into 40-foot High Cube (40'HQ) containers to arrive at your site dent-free.