| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
The lifetime productivity of a commercial laying flock is determined during its first 16 to 18 weeks of development. Achieving target body weight, skeletal frame uniformity, and synchronized sexual maturity requires an environment capable of transitioning smoothly from high-heat day-old brooding to controlled light-stimulation rearing. Our Automated Pullet Rearing Poultry House is purpose-engineered to house replacement pullets from day one through point-of-lay transfer with maximum flock uniformity and biosecurity.
Designed to seamlessly match your downstream layer facility—whether floor-raised, aviary, or multi-tier battery cage—this specialized poultry house integrates high-retention thermal insulation, draft-free minimum ventilation, and light-tight photoperiod control inside a corrosion-resistant galvanized steel structure.
Day-old pullets require steady floor or tier temperatures of 33°C to 35°C without cold floor drafts or hot spots. Our pullet poultry house features continuous 75 mm to 100 mm polyurethane (PU) insulated wall and roof panels paired with insulated concrete foundation perimeters. Optional retractable thermal partition curtains allow operators to divide the barn into localized brooding zones during the first three weeks—cutting early-stage heating fuel costs by up to 40% while maintaining tight temperature uniformity across every cage tier.
Young chicks are highly sensitive to cold air drafts, yet require continuous fresh oxygen and moisture removal. The building structure integrates high-velocity ceiling-directed side-wall air inlets and ceiling circulation fans that blend incoming fresh air with warm upper-level air before it gently descends into the brooding zone. As pullets feather out and body heat increases, the building transitions automatically to transitional and tunnel cooling modes.
When configured for 3-tier or 4-tier A-frame or H-frame pullet rearing cages, the building's structural steel portal frames (with 3.8 m to 5.2 m clear eave heights) and C30 reinforced concrete slabs are engineered to support concentrated cage leg loads, overhead feed distribution pipes, and daily manure belt conveyors without structural deflection.
To prevent premature egg laying and ensure uniform flock onset at 18 to 20 weeks, pullet rearing requires precise step-down and step-up lighting programs. All exhaust fan openings, air inlets, and cooling pad bays are fitted with multi-stage aerodynamic light traps, keeping ambient light leakage below 0.5 lux during scheduled dark hours.
| Facility Parameter | Floor & Aviary Rearing Model (PR-F12) | Multi-Tier Cage Rearing Model (PR-C14) |
|---|---|---|
| Standard Building Width × Length | 12 m – 14 m × 80 m – 120 m | 13.5 m – 15 m × 90 m – 120 m |
| Clear Eave Height | 3.0 m – 3.6 m | 4.0 m – 5.2 m (3–4 Tier Rearing Cages) |
| Target Flock Capacity | 20,000 – 35,000 Pullets | 45,000 – 90,000 Pullets |
| Wall & Roof Insulation | 75 mm Polyurethane (PU) Sandwich Panel | 75–100 mm Polyurethane (PU) Panel |
| Heating System Integration | Radiant Brooders / Hot-Air Space Heaters | Central Hot-Water Pipes / Hot-Air Ducts |
| Light-Tightness Rating | Less than 0.5 Lux (Full Dark-Out Baffles) | Less than 0.5 Lux (Full Dark-Out Baffles) |
| Primary Structural Steel | Q355B Hot-Dip Galvanized (275 g/m²) | Q355B Hot-Dip Galvanized (275–350 g/m²) |
| Transfer Door Configuration | Wide Double Bio-Doors for Pullet Carts | Wide Double Gable Doors + Loading Dock |
A: Pullets learn how to find feed and water during their first few weeks of life. If birds are raised in a cage-based pullet poultry house equipped with nipple drinkers and chain/pan feeders matching the adult layer house, they adapt immediately upon transfer at week 17–18 with zero drop in water or feed intake.
A: Because a pullet rearing cycle lasts roughly 17–18 weeks (plus 2–3 weeks of cleaning and downtime) while a layer cycle lasts 75–85 weeks, one pullet rearing poultry house of equal capacity can continuously supply three to four adult layer houses on a staggered flock schedule.
A: Vertical thermal stratification is eliminated using ceiling-mounted vertical destratification fans paired with central hot-water finned heating pipes or perforated overhead warm-air distribution tubes running the full length of the barn.
A: Yes. All interior sandwich panel surfaces, galvanized structural columns, and floor-to-wall coves are sealed and corrosion-resistant, allowing full-barn foam detergent washing, high-pressure rinsing, and thermal fogging between flocks.
| MOQ: | 600sqm |
| Price: | 50-100usd |
| Standard Packaging: | standard |
| Delivery Period: | 20-30 working days |
| Payment Method: | L/C,T/T |
| Supply Capacity: | 8000 tons |
The lifetime productivity of a commercial laying flock is determined during its first 16 to 18 weeks of development. Achieving target body weight, skeletal frame uniformity, and synchronized sexual maturity requires an environment capable of transitioning smoothly from high-heat day-old brooding to controlled light-stimulation rearing. Our Automated Pullet Rearing Poultry House is purpose-engineered to house replacement pullets from day one through point-of-lay transfer with maximum flock uniformity and biosecurity.
Designed to seamlessly match your downstream layer facility—whether floor-raised, aviary, or multi-tier battery cage—this specialized poultry house integrates high-retention thermal insulation, draft-free minimum ventilation, and light-tight photoperiod control inside a corrosion-resistant galvanized steel structure.
Day-old pullets require steady floor or tier temperatures of 33°C to 35°C without cold floor drafts or hot spots. Our pullet poultry house features continuous 75 mm to 100 mm polyurethane (PU) insulated wall and roof panels paired with insulated concrete foundation perimeters. Optional retractable thermal partition curtains allow operators to divide the barn into localized brooding zones during the first three weeks—cutting early-stage heating fuel costs by up to 40% while maintaining tight temperature uniformity across every cage tier.
Young chicks are highly sensitive to cold air drafts, yet require continuous fresh oxygen and moisture removal. The building structure integrates high-velocity ceiling-directed side-wall air inlets and ceiling circulation fans that blend incoming fresh air with warm upper-level air before it gently descends into the brooding zone. As pullets feather out and body heat increases, the building transitions automatically to transitional and tunnel cooling modes.
When configured for 3-tier or 4-tier A-frame or H-frame pullet rearing cages, the building's structural steel portal frames (with 3.8 m to 5.2 m clear eave heights) and C30 reinforced concrete slabs are engineered to support concentrated cage leg loads, overhead feed distribution pipes, and daily manure belt conveyors without structural deflection.
To prevent premature egg laying and ensure uniform flock onset at 18 to 20 weeks, pullet rearing requires precise step-down and step-up lighting programs. All exhaust fan openings, air inlets, and cooling pad bays are fitted with multi-stage aerodynamic light traps, keeping ambient light leakage below 0.5 lux during scheduled dark hours.
| Facility Parameter | Floor & Aviary Rearing Model (PR-F12) | Multi-Tier Cage Rearing Model (PR-C14) |
|---|---|---|
| Standard Building Width × Length | 12 m – 14 m × 80 m – 120 m | 13.5 m – 15 m × 90 m – 120 m |
| Clear Eave Height | 3.0 m – 3.6 m | 4.0 m – 5.2 m (3–4 Tier Rearing Cages) |
| Target Flock Capacity | 20,000 – 35,000 Pullets | 45,000 – 90,000 Pullets |
| Wall & Roof Insulation | 75 mm Polyurethane (PU) Sandwich Panel | 75–100 mm Polyurethane (PU) Panel |
| Heating System Integration | Radiant Brooders / Hot-Air Space Heaters | Central Hot-Water Pipes / Hot-Air Ducts |
| Light-Tightness Rating | Less than 0.5 Lux (Full Dark-Out Baffles) | Less than 0.5 Lux (Full Dark-Out Baffles) |
| Primary Structural Steel | Q355B Hot-Dip Galvanized (275 g/m²) | Q355B Hot-Dip Galvanized (275–350 g/m²) |
| Transfer Door Configuration | Wide Double Bio-Doors for Pullet Carts | Wide Double Gable Doors + Loading Dock |
A: Pullets learn how to find feed and water during their first few weeks of life. If birds are raised in a cage-based pullet poultry house equipped with nipple drinkers and chain/pan feeders matching the adult layer house, they adapt immediately upon transfer at week 17–18 with zero drop in water or feed intake.
A: Because a pullet rearing cycle lasts roughly 17–18 weeks (plus 2–3 weeks of cleaning and downtime) while a layer cycle lasts 75–85 weeks, one pullet rearing poultry house of equal capacity can continuously supply three to four adult layer houses on a staggered flock schedule.
A: Vertical thermal stratification is eliminated using ceiling-mounted vertical destratification fans paired with central hot-water finned heating pipes or perforated overhead warm-air distribution tubes running the full length of the barn.
A: Yes. All interior sandwich panel surfaces, galvanized structural columns, and floor-to-wall coves are sealed and corrosion-resistant, allowing full-barn foam detergent washing, high-pressure rinsing, and thermal fogging between flocks.